.Suitable for small budgets

.Adapted to all forms of paneled pcb: straight edges or not

.Depanelization possible before or after assembly of components, depending on tools

.Machining of tools by the machine itself

.Maximum card formats (X / Y): 390 x 315 or 385 x 580 mm (large format)

.Depanelization by milling

The system consists of

.A Technodrill 3

.On-board camera for manual or automatic repositioning

.A dust extraction and filtration system

.A pilot software (GALAAD) allowing to exploit the depaneling files in DXF format

.A Starter Kit

Service (on request)

.Possibility to rent over 12 or 24 months

.Maintenance contract

.Installation and start-up

.Assistance in the manufacture of tools

Technical specifications

Interpolation3 axis _ 3D

Free passage under Z axis      90 mm

Axes X, Y, Z390 x 315 x 60 mm (real under the tool with options)

Résolution0,0015 mm in micro step (0,059 mil *)

Reproductibility+ / - 0.005 mm (0,2 mil *)

Spindle power800 W

Spindle speed10000 à 24000 rpm

Chuck3,17 _ 6 mm ER11 type

Tool positionningSemi-automatic as standard,  automatic as option

Drilling rate360 holes/min (ø 0,8)

Mini track width0,15 mm (5,90 mil *)

Isolation mini 0,15 mm (5,90 mil *)

Ø drilling mini0,3 mm (12 mil *)

Moving speed100 mm/s maxi

Linear guideScrew and ball socket (pitch 5 mm)

Motor X, Y, Z3 steper motor set at 1/16 pitch (3200 steps/rd). The control by micro does not allow mecanical resonances

FréquencyUp to 200 KHz

TableGrooved aluminium for quick placement

Noise level< 65 dBA

Safety coveras standard with circuit breaker

Bottom storage cabinetOption

Positioning tool sensorIncluded as standard

External dim L x l x H950 x 700 x 630 mm

Net weight76 Kg

Power supply 230 V - 50 Hz - 8 A